assembling process
英 [əˈsemblɪŋ ˈprəʊses]
美 [əˈsemblɪŋ ˈprɑːses]
装配过程
双语例句
- Assembly Modeling and Planning of the Die For Automatic Assembling Process
面向自动装配的冲模装配建模与规划 - The assembling error of three-axis turntable is unavoidable during assembling process, which is one of the primary system error sources.
作为造成三轴转台最终误差主要的系统误差源，装配误差在装配过程中难以避免。 - In order to ensure that the components are undamaged during the assembling process, the ultimate assembly load of the component needs to be determined so that a reasonable assembly scheme can be made.
由于装配需要，通常需要确定零件在装配情况下所能承受的极限载荷并选择合理的装配方案。 - The Beading and assembling process of IP superheater for Weihe project are introduced in detail.
着重介绍了渭河大化工程中的关键设备中压蒸汽过热器管箱堆焊和组装工艺。 - Shocks, high temperature, or contacts of sharp edge components should not be allowed in battery pack assembling process.
在电池装配过程中不允许撞击、高温或接触尖锐部分。 - To a certain extent, it reflects the internal relation of assembling process, which can help deal with the parameter of assembling cost before the optimization Train Formation Plan.
该关系式在一定意义下反映了集结过程的内在联系，在优化编组方案过程中对集结耗费这一参数的处理有一定的指导意义。 - Nozzle-opening/ closing Response Control on Multi-nozzle Cell Controlled Assembling Process
多喷头细胞受控组装过程的启停响应控制 - These results may contribute to the understanding of assembling process of multi-component systems.
这些研究结果对理解多组分分子组装的规律将带来很大的帮助。 - Familiar with molding, or stamping or assembling process;
熟悉注塑、或冲压、或装配工艺； - By adopting the above structure, structural members and assembling process of the connector are simplified, and production and assembling cost is lowered.
利用上述构件的组成，可使连结器的构件简化及组装简易，进而降低制造组装成本。 - The main types and causes of failure on casting rollers of aluminum continuous cast-rolling mill were summarized. The ways to improve the working life of casting roller were put forward from the aspects of thermal assembling process and cast-rolling process.
总结铝连续铸轧机铸轧辊失效的主要形式及原因，从热装配工艺、铸轧生产工艺等方面提出了提高铸轧辊使用寿命的途径。 - The result can be used to instruct the centering assembling process to improve the coaxial tolerance of accelerator.
研究结果为加速器对中装配同轴度提高提供依据。 - The technique essentials and keys to the key parts modeling and assembling conjunction design process were discussed. And dynamic simulation of assembling process and conjunctional production of two dimensional drawing were conducted.
探讨了关键零件的三维特征造型过程中的技术要点和基于装配的关联设计的技术关键，动态模拟装配过程、关联产生二维工程图。 - It was high efficiency, good quality and could replace the hand or semi-mechanized assembling process.
生产效率高，质量好，性能稳定，是替代手工组装和半机械化组装线的理想设备。 - With the right side panel of a car as the example, calculation method and sort of assembling process are explained.
以某车右侧围为例，对拼装时间的计算方法和拼装过程的排序进行了说明。 - Based on the assembling process analysis, the system engineering analysis to the construction formwork assembling machine was applied.
在仔细分析了建筑模网装配过程的基础上，对模网装配机进行系统工程的设计分析。 - The fundamental theory and the assembling process were discussed in the paper.
讨论了装配过程中的一些基本原理和装配的过程。 - Finally, an architectural design example was illustrated for showing the application of particle swarm optimization in assembling process of cooperative architectural design.
最后，以一个建筑外观设计为实例，介绍了算法在协同建筑设计组装过程中的应用。 - In the paper, the concept of integrated product and process configuration was proposed. The methods assembling process components to the whole business process were introduced and key technologies were also discussed. System supporting process configuration was introduced as well.
提出了产品与过程集成配置的概念，介绍了利用过程元件装配来进行过程配置的方法、基于过程元件装配进行过程配置的关键技术和相应的系统。 - Starting from controlling punching burr, the die design and the process of parts as well as the assembling process and etc of anode flake blanking die are stated in details.
从控制冲裁毛刺的角度出发，对正极片落料模从模具设计到零部件的加工工艺以及装配工艺等进行了详细阐述。 - According to the method, an assembly model mainly included four models: an assembly tree with hierarchical structure, a part model with compounded form, a constraint model and a path model object to assembling process.
该方法的装配模型主要包括层次结构的装配树模型、复合表达的零件模型、面向过程的约束模型和路径模型。 - Based on the assembling process of products and the function analysis of assembly machines, the modular principle was applied in the design of a serial assembly machines for 3D steel meshes.
以产品装配工艺和装配机械的功能分析为基础，将模块化原理应用于三维钢网系列装配机械的设计上。 - Through analyzing the structure of the main reducer, some mechanical factors, which affect the quality of the assembling process of the rear axle, are found out.
本文剖析了主减速器总成结构，找出后桥装配过程中的主要力学因素。 - In this paper the inspecting principle and method of the major inspection items in carburetor assembling process are presented.
介绍了化油器装配过程中的主要检测项目的检验原理及方法。 - The welding and assembling process of heavy girder often results in twisting distortion.
大型薄壁梁在焊接拼装过程中常常会出现扭转变形。 - Through assembling process takes time, the people optimized, making out assembling process network chart.
通过对安装工序所需时间、人员进行优化，绘制出安装工序网络图。 - After that, a component model supporting interface connection architecture and plug and socket architecture, and an architecture based component assembling framework are proposed, and the building and assembling process of reusable software components is specified.
然后提出了支持接口连接式和插头插座式体系结构类型的构件模型以及基于体系结构的构件集成组装框架，并给出了构件的制作和组装过程； - An assembly cost evaluation model for assembly sequence planning is proposed, in which the assembly cost is based on the changing times of assembly direction during assembling process and the total motion uncertainty degree of parts.
针对装配序列的特点提出了一个装配成本评价的模型，认为装配成本与产品装配过程中装配方向的变化次数，产品组成零件装配后的运动不确定度总和有关。 - Research is performed in view of the quality characteristics with successive values in the assembling process. The analysis is conducted by using the mean value-range chart used in the statistic quality control to form a complete and effective quality control method.
针对装配过程中具有连续值的质量特性进行研究，运用统计质量控制中的均值-极差图对其进行分析，形成一套有效的质量控制方法。 - This article analyzed through the model simulation has arched the tower assembling process each working procedure, It has affected the tower synchronization construction the key working procedure to carry on the stress analysis, and has arched the tower to close up smoothly lays the corresponding rationale.
本文通过模型仿真分析了拱塔拼装过程的每一工序，对影响塔梁同步施工的重点工序进行了受力分析，为拱塔的顺利合拢奠定相应的理论基础。